Image
|
||
Image
|
||
R-10 | ||
A. Lot Dimensions | ||
A1 | Area (min) | "7,500 sf " |
A2 | Lot Width (min) | 45’ |
A3 | Outdoor amenity area (min) | 10% |
A4 | Lot area per unit (min) | "2,500 sf " |
B. Building/Structure Setbacks | ||
B1 | From primary street | 10’ |
B2 | From side street (min) | 10’ |
B3 | From side lot line (min) | 5’ |
B4 | From rear lot line (min) | 20’ |
B5 | From alley i | 4' or 20' min |
B6 | Residential infill rules may apply (see Sec. 2.2.7.) | yes |
C. Parking Setbacks | ||
C1 | From primary street (min) | 10’ |
C2 | From side street (min) | 10’ |
C3 | From side/rear lot line (min) | 0’ |
C4 | From rear lot line (min) | 3’ |
C5 | "From alley, garage only (min) " | 4’ |
D. Height | ||
D1 | Principal building (max) | 45'/3 stories |
D2 | Accessory structure (max) | 26' |
D3 | Residential infill rules may apply (see Sec. 2.2.7.) | yes |
E. Pedestrian Access | ||
E1 | Street-facing entrance required (min 1 per building) | yes |
See Sec. 1.5.4.D “Building Setbacks” for specific building element requirements. |
i Garages (or a portion thereof) must either be located 4 feet from the travel lane of alley or rear access drive or be a minimum of 20 feet from the alley or rear access drive. Where parking spaces are located between the garage and the alley or rear access drive, the garage must be located at least 20 feet from the travel lane of alley or rear access drive.