Sec. 4.6.3. Application Requirements

  1.  In addition to a rezoning application, a CMP Master Plan application must include the following required elements. More than one required element may be combined onto a single map/plan sheet so long as legibility is not adversely impacted.
    1. Vicinity Map.
    2. Existing Conditions Map.
    3. Vehicular Circulation Plan.
    4. General Layout Map delineating the boundaries of all district boundaries including Height and Frontage designations (if any). In lieu of designating Frontages on the General Layout Map, a Detailed Layout Map may be included that specifies the maximum and minimum building heights, maximum and minimum building setback lines for all structures and parking areas, and locations of residential and nonresidential land uses.
    5. Development Plan showing the proposed location of buildings.
    6. Pedestrian Circulation Plan.
    7. Parking Plan.
    8. Open Space Plan.
    9. Tree Conservation Area Plan.
    10. Major Utilities Plan.
    11. Generalized Stormwater Plan.
    12. Phasing Plan, if more than one phase is contemplated.
    13. An illustrative 3-dimensional model or rendering that shows building elevations, location of streets and prominent site features. The 3-dimensional model must illustrate the potential massing and scale of the proposed development, but will not be regulatory.
    14. Common Signage Plan (see Sec. 7.3.16.H.).
  2. Each application must also include the following.
    1. The specific standards intended to be modified as part the approval process. If a standard is not listed as being modified, then the standard is considered applicable and must be adhered to. However, subsequent requests for alternative compliance and variances may still be submitted.
    2. The proposed maximum number of dwelling units by phase or subdistrict.
    3. The proposed maximum square footage of nonresidential floor area by phase or subdistrict.
    4. A general description of how the CMP District conforms with the Comprehensive Plan.
    5. A general description of how the CMP District meets the intent of Sec. 4.1.1.E.
    6. An Allowable Principal Use Table, listing each use in Section 6.1.4. and denoting whether each use is a permitted use, limited use, special use, or not permitted.